How to Make DIY No Sew Sofa Slip Covers. Slipcovers are popular because they are relatively inexpensive and easy to use. Many different types of slipcovers can be bought, and pattern companies sell directions for sewing slipcovers at home. For those who cannot or prefer not to sew, however, beautiful, clean-looking sofa slipcovers are still...
Slipcovers are popular because they are relatively inexpensive and easy to use. Many different types of slipcovers can be bought, and pattern companies sell directions for sewing slipcovers at home. For those who cannot or prefer not to sew, however, beautiful, clean-looking sofa slipcovers are still possible. You can make your own convincing multiple-piece sofa slipcover from large pieces of fabric without having to sew a stitch.
Things You'll Need
Large pieces of fabric
Safety pins or T-pins
Determine how much fabric you will need for each sofa cushion. Remove the cushions and measure all the way around the length and width of the cushions, adding at least 4 inches to each measurement. Cut the cushion fabric in these measurements.
Determine how much fabric you will need for the rest of the sofa. Measure from the floor to the seat, the seat itself, the seat to the top, and the top to the floor at the back. Add these measurements to get the length you will need. For the width, measure from the floor up over the arm rest, from the arm rest across the seat, and up over the other arm rest to the floor. If you are working with fabric that frays, add 2 inches to each measurement for the hems.
Cut your fabric to size. If you have added to the hems, at this stage, fold each hem under 1 inch and iron it flat, then apply the no-sew adhesive to the hem and turn it under another inch. Press the hems, fusing the fabric together.
Drape the fabric over the main part of the sofa, without the cushions. Adjust the fabric so that it falls evenly at floor level all around the chair, then press the fabric into the crevices at the arm rests and sofa back, adjusting as you go. Smooth out the fabric over the seat and arm rests. In each crevice, pin the fabric in place with a safety pins, until the fabric is secured to the sofa.
Attach the fabric to the sofa under the arm rests with upholstery pins, out of sight. If necessary, hide these pins with accessories like fabric ribbons, ties and buttons.
Place the cushion fabric face-down on a surface, and put the cushion face-down on top of it. Fold the side lengths over the cushion bottom until they meet or overlap in the middle, then fold the top and bottom lengths over this layer. Secure the fabric at the ends with large safety pins or T-pins, pushing the pins through all the layers of fabric. Place the cushions onto the sofa, hiding the pins.
Tips & Warnings
If you would like to make your slipcover in a single piece, rather than covering your cushions, leave the cushions on the sofa and factor them into your measurements, then add some extra to the width and length. When you drape the fabric over the sofa, tuck it into the cushion crevices like you would while making a bed.
Check out these related posts